Set up plant
To set up the system in the Internet portal, you need the serial number and the MAC address of the e.manager.
The serial number and MAC address can be found here:
- Sticker on the device (left side)
- Sticker on the box
- Home page of the internal website
Installationswizard
The installation wizard guides you step by step through the setup of your PV system.
You can reach the wizard at the following address:
http://portal.enerserve.eu/install
Step 1
Enter the serial number and the MAC address.
Please pay attention to upper and lower case.
The MAC address must be entered in the following format: XX:XX:XX:XX:XX
If the serial number and MAC address are correct, the button for the second step appears.
Step 2
In the second step, you can select whether the new asset should be assigned
to an existing main access or whether a new main access will be created.
Example:
You as an installer want to create an installation with a main access for the end customer.
You as an installer want to create an installation with a main access for the end customer.
Then please select I am a new customer and create the installation.
Later you can subordinate the new main access to your main access.
As a new customer, please enter a user name (no umlauts), a password, and your e-mail address.
If you already have a main account, enter your username and password.
Step 3
In the third step, all inverters, meters and other devices connected to the e.manager are displayed.
Enter a plant name (e.g. PV plant main street).
-
Deactivate the devices that should not be included in the plant.
-
Enter the number of modules and the module power.
-
All data can be changed later, or devices can be added or deleted.
The devices, which have the designation PIC at the port, are the digital and analog inputs. e.g. 1=Digital 1; 2=Digital 2; 9=Analog 1; 10=Analog 2, ...
Step 4
At the fourth step you have created the plant and you can log in with your access data.